u could easily use a trrs splitter with two stereo inputs like one for mic and the other for headphones. the Sound then goes straight out of the OP-Z line out but won‘t be affected by any FX or Filter etc.
1 Like
Probably because they want to sell you a module with a input.
1 Like
https://www.aliexpress.com/wholesale?spm=2114.search0104.8.7.470342a2ZgsiXp&initiative_id=QRW_20190218152547&SearchText=trrs+breakout&productId=32693340142
^^^^maybe use this or
ive seen people use av cables? to trrs and then just converting with attachments or snipping and resoldering like this https://www.aliexpress.com/item/High-Quality1-8-3-5mm-4P-mini-AV-TRRS-angled-plug-to-3-RCA-female-jack/32240877944.html?spm=a2g0s.9042311.0.0.d1924c4dNEkIHF
The problem is not splitting out the channels. That is the easy part. The problem is the proprietary signal created by Apple that the OP-Z expects before turning the input channel on. See my original post above.
There are headphones with detachable cables that work with iPhones. Maybe one of those would work — you could even use it to take a signal from a mixer.
What would you do with the sound once it got into the OP-Z though? As far as I see, it just passes the signal through to the speaker.
1 Like
Do you mind sharing a link the product you are referring to?
You can actually pump the microphone through the effects and through the tape track.
you don‘t need a separate button for the mic. at least the line in signal has nothing to do with the mic mode on OP-Z. if you put in an apple headphone it will use the mic mode.
yeah it’s just straight to the output, no gain control,fx etc.
This has not been my experience. When I plug in Apple headphone I need to press the Apple “play” button to enable input (as the manuel suggests). I can then route the Apple headphone mic into the tape and effects (see my comment above), and change the mic volume as normal (as the manuel suggests).
I have cable that splits out the stereo output and mono input from the TRRS jack, but this proprietary Apple signal is still needed to enable the input, and furthermore, it needs to occur in the circuit before the input, so I will probably have to hack something together myself or wait for TE to come up with a solution.
Its prolly just a switch yo ground or w.e. just look up a schem and replicate it.
It unfortunately is a specific signal in the supersonic frequency range.
1 Like
I think I understand what you mean. I will give this a shot and report back. This method would most likely pickup sound from the headphones with inline microphone/button AND whatever I plug directly in on the other side of the splitter, but I think it is the best option right now, short of making my own Frankenstein cable.
with a Button you‘ll activate the mic mode with all it’s functions, without a button it’s just a audio thru mode.
1 Like
Huh, interesting! My OP-Z does not pass any audio through without the button. Maybe we are on different firmware?
Great find!
I don’t have a link. The cable came with a pair of headphones, and detaches. It works with the OP-Z, although I need to do something so I can actually listen to it too!
same OS 1.17 it’s trrs to a red mic input and a green headphone output, this way iam routing my Mopho through the op-z.
maybe you‘re right! maybe it’s just a bad cable that passes the Audio through like without touching anything inside OP-Z because as i’ve turned the connection a little bit the mic mode popped up, with an orange led near the mic. after different turns it wasn‘t available at all.
1 Like
Guys -
It’s not a proprietary Apple signal, it’s just the wiring of the headset…
That said, this is type of wiring just works for a Microphone input built into the cabling not an external signal.
What I’m trying to make is a TRRS to TRRS cable with a button on it to activate the “microphone in” function that works the same as when a headset is plugged in.
I followed the attached schematic but had to alter it since the destination of the TRRS cable coming from the OP-Z is another TRRS plug rather than two speakers and a microphone… and my cable doesn’t seem to work correctly.
Do I need to add an extra resistor in there to mimic the microphone type of resistance?
I want to connect the OP-Z to the Aux input of an Eventide Mixinglink (this is a bi-directional TRRS jack) and be able to use the OP-Z effects on the output from the Mixinglink.
Thoughts?
No it is. Apple and TE do not use the same open-source resistor design that Android uses and that you describe. I already confirmed it and mentioned it in my original post, so I am not sure why people keep trying to contradict me.
As far as I can tell, Apple’s design is very hard to find details on. Luckly @masterofstuff124 found someone who reveres engineered an old pair. Check his link above. Hopefully, Apple hasn’t changed the design since then.
Edit: Here is the link that @masterofstuff124 shared: http://david.carne.ca/shuffle_hax/shuffle_remote.html